No matter what you are moving, the basics stay the same, regardless of whether you are moving your hot tub across your yard or to the next neighbourhood the process stays the same.
But still unsure how to move a jacuzzi hot tub? The goal is simple!
You just need to drain the tub and move to a new location for the installation.
Though sounds easy, there are definite challenges associated with it. One of the major challenge is moving the heavy hot tub that weighs 500 to 1000 pounds without getting injured.
Well, uncertainties do exist !
But still if you are determined to move a spa hot tub you can either gather four to five of your family members who are physically capable to lift a hot tub and transport it to your new space or you can take support from any hot tub moving companies in Australia.
The decision entirely depends on you, what do you want, a DIY or a professional hot tub movers?
Well, the above question can be answered once you understand these quick easy steps that you can follow while removing the hot tub.
If you think you can follow the process sincerly, without any injury yes, the DIY can save dollars for you, but if you think you do not want to take a chance, the professionals are always there to address the problems.
You can answer this question: how do you move a hot tub?
The answer to the question is amazingly easy; unplug, drain, lift, and place to your next location.
But before that, you need to understand a few essential requirements while trying to move a hot tub safely.
-
Hot tubs are way too heavy for you to carry –
It’s not surprising that hot tubs are extremely heavy, making them difficult to move around.
Thinking, what can be the weight of your hot tub?
Well, its heavy! A normal hot tub is estimated to be of an average weight of 800-900 pounds without water.
To figure out the exact weight of your hot tub you need to check the specifications or user guide manual which you have received while buying your splendid jacuzzi tub.
From the average weight of 900 pounds the weight can reach to 6000 pounds (about 2721.55 kg). So check the weight and drain the unit before moving it around.
Forget the heaviness part.
Now, look at the mass; it is enormous. Despite our best efforts, we cannot carry or pull around without added assistance.
The size of hot tubs can vary, but they all share one thing in common: that is its huge mass.
The home users are offered three sizes of hot tubs; the small hot tubs (2-4 people), medium hot tubs (5-6 people), and large hot tubs (7+ people).
These pools have a length of 5’4” to 7’9”, a width of 5’4” to 9’2”, and a height of 29” to 38”.
It is huge right!
-
Expensive to remove the hot tub –
Jacuzzi tubs are expensive, so you would not want them to damage during your experimental move, would you?
Can you tell me how much does it cost to move a hot tub?
For some of the more luxurious models, a hot tub can cost up to $8,000, depending on the brand, model, size, and added features, while the average model can costs $6000.
When you have invested so much for luxury, you would n’t want to take any chance.
You will want to choose a safest and most secure way to move your entertainment and relaxation unit by keeping in mind its dimensions, weight, and cost.
In contrast to the likeable damage that you might insure while doing DIY is more than the cost you will pay to the professional hot tub remover.
Best way to move a hot tub: Essentials needed to remove the hot tub
Hot tubs are hard to move due to their strange shape and enormous size.
Considering the tub’s high cost, finding a suitable way to move it becomes more reasonable. But if you insists on doing it by yourself, you can take professional consulting service from the pool removal companies for the best course of action.
How to move a spa? Tell your mover you have a hot tub so that they bring along the necessary equipment if they have taken responsibility of your home moving service.
As said earlier, moving your hot tub yourself is possible with careful preparation and planning. You can take professional consulting before starting the tub removing process.
Here are the few tools you need to keep by your side while moving the hot tub.
Tools Required to Remove the Hot Tub
- Tape measure
- Moving blankets
- Moving straps
- Towel
- Attachable hose
It is a dream come true for most homeowners.
A hot tub in the backyard while watching the stars is a reality for most homeowners. What a great idea, isn’t it?
Although hot tubs are popular, they are heavy and bulky, so you will need few of the tools to move them safely when you move to a new house or redesign your backyard.
Best way to move a hot tub: Step-by-step process to remove the hot tub
You can quickly move your hot tub by following these 7 simple steps, and you will enjoy relaxing soaks in your new backyard in no time. So here we go into the quick seven simple processes in removing your hot tub equipment.
Step 1: Gather all necessary moving tools and supplies
So, how to move a jacuzzi hot tub?
On your checklist, cleaning supplies should be carried which includes straps, two furniture dollies, large plywood pieces, and moving belts.
With Jam Pool removal, you can find a moving dolly. A hot tub moving equipment rental is available at various home improvement stores, so you can easily get any of the equipments on rent that is needed for the hot tub removal.
Make sure you do not try to move a hot tub without professionals if you are unsure.
Step 2: Disconnect your hot tub for moving
When moving your hot tub, you can take specific steps.
When addressing the question how to remove a hot tub from a house, firstly, drain the pumps and pipes, this is just as crucial as emptying the shell.
You can drain your tub by following these steps:
- You should turn off the power supply first. In the circuit box, find the breaker switch and turn it off. Hot tubs that run on 110 volts can be unplugged from the wall if they are of spa models. For hot tubs that are directly wired to power supplies, you need an electrician to disconnect them safely.
- A hose can be connected to the drain valve by clicking on it once the drain valve cover has been removed. Connect the garden hose to a drainage outlet and the valve on the other end.
- After that, open the drain valve of the spa to release the water. Alternatively, you can let the water drain, which can take a while.
- Vacuum it with a wet-dry system is an effective way to remove the remaining water.
- Check your hot tub for any repairs and clean it if necessary.
Step 3: Put your Hot tub on DOLLY
When you are done with the prep work for how to remove a hot tub, you will need a dolly to move the hot tub.
If you plan to move it, ensure that three people are available for the job!
With the help of extra hands, the hot tub can also be effortlessly balanced and maneuvered onto the dolly.
Put two people on the same side of two different corners.
Use the 4×4 lumber, one person can slide it underneath on the lifted side while another person raise the other side.
As a result, the tub will be propped up off the ground.
Once you have moved the dolly under the hot tub, you should be able to move it out of the way.
Take this entire how to remove a hot tub step slowly !
Put the dolly into the right place after carefully positioning it since the tub has already been propped up. After the hot tub is in place, you will need to remove the wooden boards on the other side.
After that you will need to remove the wooden boards on the other side.
Step 4: On the moving truck, load the hot tub
In this section we address your question of how to transport a hot tub?
The dolly must get pulled up through the furniture loading ramp by one person, while the hot tub must be pushed from below by a second person if you are loading the hot tub into a moving truck.
If there is a fourth person, they should take the other side of the ramp to support the hot tub from all sides.
While the third person should stand on the other side of the ramp to balance the hot tub.
Ideally, your team should be able to wheel the hot tub to the new location in the yard or to the moving truck with ease, this how to transport a spa for your next location.
In the back of the vehicle, tie-down straps to keep the hot tub secure and prevent it from shifting or moving, this is how you move a hot tub !
Step 5: Ensure your hot tub is secure in the moving truck
For a safer landing, how to move a spa pool with your team?
Well for that, your partner should help you roll your hot tub up a ramp and tie it down with ratchet straps if it is being moved in a moving truck.
It would be ideal if you could keep the dolly underneath the vehicle during transportation. The tub can be secured against the back wall if you need to remove the dolly.
Step 6: Unload your hot tub carefully
Reverse the steps outlined above.
Carefully move the hot tub into its new position with the help of a friend or a moving professional. The drainage valve should be closed. Make sure there are no damages from the transit.
It is advisable to hire a professional to help unload the hot tub if it is going to get installed on a third-floor deck or higher.
You must first make sure your deck can carry the weight of a hot tub.
Moving forward with hot tub moving sled, the movers will use winches, cranes, or, in rare cases, helicopters to lift the tub to the upper deck.
Many crane companies provide this service, and you will need to ensure that trees, power lines, and other obstacles aren’t blocking the overhead access.
You can schedule the installation of a hot tub on the third floor by contacting your moving service.
Step 7: Inspect & connect the hot tub where planned
There is no more challenging work left!
Ensure that there are no damages on the tub.
Now that it is in its new location clean it once again. It can now be refilled with water and plugged into the nearest power source once it has been cleaned up.
Keep algae away by adding chemicals. The lid should also be put on when the tub isn’t used to prevent bugs, debris, sticks, leaves, and other items from getting inside.
A hot tub needs to be moved, but how much does it cost?
After all the DIY process of removing your hot tub from the original place, you are still going to insure added costs.
How much does it cost to move a hot tub, even if you are taking a DIY process?
Typically, in Perth moving on-site costs between $200 and 400, but the charge may vary depending on variables and difficulty.
Additional charges may apply if the hot tub must travel through several awkward spaces. When estimating prices, it is also essential to consider the area where you live.
It is also essential to consider the area where you live when estimating prices. Because of the distance variations, off-site moves do not have a set price. Most dealers do not offer off-site moving services and their might be a varying charges on how much to hire crane to move hot tub.
A reputable service can, however be referred to you to by your friends or family members.
When you ask any of the removal company about how much cost would imply on tub removal?
You will receive a quote from any of the removal companies that considers mileage, regardless of where you are moving.
An out-of-state moving company may be your best option if you’re moving out of state.
Depending on your situation, they may include the cost of moving your spa in the overall cost.
The distance, variables, and obstacles associated with an off-site hot tub move will be greater than those associated with an on-site activity.
How much costs will the removal company charge to hire a crane to move the hot tub?
The price of a crane will vary depending on how long you need it, ranging from $100 per hour for an operator to $825 per hour for a 600-ton crane.
The weekly rental rates for cranes range from $2000 for a 2.5-ton deck crane to $2800 for a 15-ton carry crane.
Costs will vary based on distance and crane size to the job site.
- For larger cranes, road permits will likely be required. It usually costs between $100 and $200 to get one. Make sure the truck’s fuel is replaced.
- Licensed operators, flaggers, pilots, or riggers-signals will cost you $60 to $100 each an hour. When it comes to large cranes, using them without rigging and flagging is illegal.
- Permits are required in some cities. Your final cost projections should include that cost.
- You may have to pay for their travel if the operator or other people work outside their usual space.
- The overtime costs will need to be included in your budget if the employee works more than eight hours.
- If they work on holidays, you will be charged holiday rates.
- It may cost you money to prepare a lift plan.
Conclusion
Even though moving a hot tub on your own can be exhausting, stressful, and tedious, it remains an option.
But you still need several people for a safe and effective tub removal service, which can cost your time, your health and tremendous amount of effort which could have been used for some other activities.
So, hiring a moving company is better than trying it to do it by yourself.
Why not hire Jam Pool removal service. Aside from being experienced in moving hot tubs, our movers are also friendly and accommodating. You can spa tub or jaccuzzi removal service with utmost care and efficiency whenever you are planning move it!
